User manual

IRD-2900 Series
Professional Integrated Receiver Decoders
Scopus Documents (p/n 100793) Page 3-17
• LNB L.O. TYPE SETUP
The LNB L.O. type parameter defines the LNB oscillator type in use. Two
standards are generally used: ‘Universal’ and ‘Wide Band’.
In addition, the oscillator value can be manually configured.
The LNB L.O. type can be acquired from satellite transponder information.
Most satellites use the ‘Universal’ type of L.O. unless specified otherwise.
NOTE
Manual configuration of the oscillator frequency is rarely used and is intended for advanced users only.
LNB L.O. Type
1 UNIVERSAL (9.75,10.6)
2{ WIDE BAND (9.75,10.75)
3
{ Ku BAND
4{ C BAND
5{ DiSEqC (9.75, 10.6)
The available options are:
• Universal (9.75,10.6) – Defines LNB universal L.O. type
• Wide Band (9.75, 10.75) – Defines LNB wide band L.O. type
• Ku-Band – Defines Ku-Band LNB L.O. type
• C-Band – Defines C-Band LNB L.O. type
• DiSEqC (9.75, 10.75)
NOTE
When selecting the Ku-Band or the C-Band, you must manually set the L.O. frequency (see the following Section
I in this chapter).