User manual

IRD-2900 Series
Professional Integrated Receiver Decoders
Scopus Documents (p/n 100793) Page 2-3
2.2.3. Insertion of the DVB-CI Module (PCMCIA)
CAUTION
D O NOT ATTEMPT TO REMOVE OR INSERT THE DVB-CI MODULE OR THE SMART CARD WHILE THE IRD IS POWERING UP OR
INITIALIZING .
The figure to the left illustrates the IRD with the DVB-CI
module (PCMCIA card) and the Smart Card used to
decrypt the incoming signal. The IRD is provided with two
PCMCIA slots for up to two DVB-CI modules. The PCMCIA
should be firmly inserted into one of the two slots
provided to ensure contact. Each DVB-CI module
accommodates one Smart Card, inserted with the UP
mark pointing upwards and forward.
2.3. C
ABLE
C
ONNECTION
The IRD-2900 provides all the connections on its rear panel.
The rear panel is comprised of audio outputs, video outputs, data outputs, and
control interfaces (see Table 2-1 for cable information).
Figure 1-11 illustrates the IRD-2992 rear panel, as an example for connector
types.
Figure 2-1: IRD-2992 Rear Panel