User manual

IRD-2900 Series
Professional Integrated Receiver Decoders
Scopus Documents (p/n 100793) Page 1-9
1.5.2.3. IRD-2962 Interfaces and Features
The IRD-2962 is a single 4:2:0 decoder IRD. All IRD-296x family consists of two
composite video interfaces. The CVBS #1 connector is used for broadcast quality
video and the CVBS #2 connector can be used for monitoring.
Figure 1-6 illustrates the IRD-2962 rear panel. The IRD-2962 basic features and
software-licensed features are described below.
Figure 1-6: IRD-2962 Rear Panel
Basic Features
•
2 composite video interfaces
• 2 SDI interfaces
• Embedded VBI and audio in SDI
•
2 analog-audio-stereo balanced interfaces
• 1
st
Active analog stereo pair
• 2
nd
Active analog stereo pair
•
2 AES/EBU-SPDIF audio-unbalanced interfaces
• 1
st
and 2
ND
Active AES/EBU-SPDIF
• SNMP management (10/100 Base-T)
•
Web-based management (10/100 Base-T)
• RS-232 low speed data
• GPI
•
Front panel monitoring connectors
Software-Licensed Features
•
ASI input
• Dual ASI outputs
• MPEG-over-IP output
•
IP data output
(MPE de-capsulation)
• Genlock input and loop-through output
• Dolby Digital (AC-3) LT/RT downmixing
• Linear PCM (SMPTE 302M 2000), Dolby-E
Pass-through
NOTE
In the case of power failure or system shutdown, ASI OUT 1 output will become ASI loop-through. Use ASI OUT
1 output for cascading a chain of IRD-2900