User manual

User Manual
Overview
Page 1-8 (Rev. 2.0 /August 2005)
1.5.2.2. IRD-2961 Interfaces and Features
The IRD-2961 is a single 4:2:0 decoder IRD. The IRD-296x family consists of
two composite video interfaces. The CVBS #1 connector is used for broadcast
quality video and the CVBS #2 connector can be used for monitoring.
Figure 1-5 illustrates the IRD-2961 rear panel. The IRD-2961 basic features and
software-licensed features are described below.
Figure 1-5: IRD-2961 Rear Panel
Basic Features
• 2 composite video interfaces
•
2 analog audio stereo balanced interfaces
• 1
st
Active analog stereo pair
• SNMP management (10/100 Base-T)
•
Web based management (10/100 Base-T)
• RS-232 low speed data
• GPI
Software-Licensed Features
• ASI input
•
Dual ASI output
• MPEG-over-IP output
• IPdata output (MPE de-capsulation)
•
Russian SECAM D/K (composite video only)
• 2
nd
Active analog stereo pair
• Dolby Digital (AC-3) LT/RT downmixing
NOTE
In the case of power failure or system shutdown, ASI OUT 1 output will become ASI loop-through. Use ASI OUT
1 output for cascading a chain of IRD-2900