User manual

IRD-2900 Series
Professional Integrated Receiver Decoders
Scopus Documents (p/n 100793) Page A-13
After the previous software is erased, message “Ready For Receive” is
displayed.
2. In the HyperTerminal, select Transfer
Æ
send file.
3. Specify to which used protocol to send the software file. It can be
“Xmodem” or “1K Xmodem” protocol.
NOTE
“1K Xmodem” is faster than the “XModem”.
4. Specify the path of the software file in your PC, for example: