User manual

IRD-2900 Series
Professional Integrated Receiver Decoders
Scopus Documents (p/n 100793) Page A-5
LOADING THE FILE
To load a source file to the IRD from a local PC:
1. Type put and Click [Enter]
2. After Local File, type the file name with the suffix (Notice - the software
file name and path in the PC should be known).
3. After Remote File, type ‘/rom/sw_image.bin’.
After confirmation, the IRD progress is displayed in a loading screen on the IRD
front-panel. In the left frame window the loading progress is indicated by a
percentage and a blinking progress bar. The following figure displays the IRD
loading screen.
___________________________________________
Service1: CAS
CNN
________________________________________________________________________________________
Service2: CAS
Click Enter for menu Yes
___________________________________________
WARNING
IF THE IRD IS, FOR ANY REASON, SHUT DOWN DURING THE SOFTWARE DOWNLOAD, THE
PROGRAM MUST BE REINSTALLED THROUGH BOOT SOFTWARE DOWNLOAD. REINSTALLATION IS
AVAILABLE THROUGH RS-232. SEE PARAGRAPH A.2.2.2.
The file must
be in the
same path!!!
File name with Suffix