User manual

User Manual
Front Panel Operation
Page 3-82 (Rev. 2.0 /August 2005)
3.4.4.1. Video 1 and Video 2
The Video 1 and Video 2 Menu displays information about the video format
The Video 1 Menu is entered from the IRD Video Status Menu (see
Paragraph 3.4.4). The following figure displays the Video 1 and Video 2
menu:
Video #
1-3-4-1
1 Standard Format 625 [Ln]
2 Frame Rate 25 [Hz]
3 Chroma Format 4:2:0
4 Resolution H:720 * V:608
5 Aspect Ratio 4:3
6 Bit Rate 11080800 [Bps]
7 VBV Buffer Size 04096000 [Bit]
8 Decoding Errors 000000
NOTE
The ‘Decoding Errors’ parameter indicates the video stream health.
The available information is:
• Standard Format – Indicates the number of lines in the incoming video.
In this example, 625 lines indicate PAL video format.
• Frame Rate – Displays the frame rate of the incoming video stream
• Chroma Format – Displays the Chroma format currently used for the
incoming video stream
• Resolution – Displays the horizontal and vertical video resolutions for
the incoming video stream (for example, the number of pixels per
horizontal and vertical screen lines)
• Aspect Ratio – Displays the aspect ratio for the incoming video stream
• Bit Rate – Displays the bit rate, in bits/sec, for the incoming video
stream
• VBV Buffer Size – Displays the VBV buffer size
• Decoding Errors – Displays the total number of decoding errors