User manual

User Manual
Front Panel Operation
Page 3-76 (Rev. 2.0 /August 2005)
3.4.1.2. IP Receiver Status Menu
The IP Receiver Status Menu displays parameters that are used for
connecting the IRD to the IP network for connecting to a required TS source.
The IP Receiver Status Menu is entered from the IRD Status Main Menu (see
Paragraph 3.4) and is displayed in the following menu format:
Receiver
1-3-1
1
MPEGoIP Input 1
2
MPEGoIP Input 2
3
General
MPEGOIP INPUT #
MPEGoIP Input 1 1-3-1-1
1 MAC Address 00-78-34-25-95-AC
2 Link Status Down
The MPEGoIP Input Menu parameters are categorized as follows:
• MAC Address – displays the MPEG over IP front-end MAC address.
• Link Status – displays the current link status
The link status available parameters:
- Down – Link down
- Up – Link is up and connection established
- 10 Base-T, 100 Base-T – IP Data Port Speed
- Full – Full Duplex, IP Data Port Duplex
- Half – Half Duplex. IP Data Port Duplex
The horizontal bars [--] appear when the IP Data Port link is “Down” or
when the IP Data Port is disconnected.