User manual

IRD-2900 Series
Professional Integrated Receiver Decoders
Scopus Documents (p/n 100793) Page 3-69
3.3.8.2. Serial Control Port Configuration
The Serial Control Port Menu allows you to set the serial control port
parameters.
The Serial Control Port Menu is entered from the IRD Unit Configuration Menu
(see Paragraph 3.3.8). The following figure displays the Serial Control Port
menu:
Serial Control Port 1-2-8-2
1
HW Interface RS232
2
SW Protocol TERMINAL ECHO
3 Baud Rate 115200 [Baud]
4 Address FFFF
The following paragraphs provide information about the Unit Serial Control
Port configuration options.
• HW INTERFACE
HW Interface
1 RS232
2{ RS485
The available options are:
• RS-232
• RS-485
• SW PROTOCOL
SW Protocol
1{ TERMINAL ECHO
2 TERMINAL NO-ECHO
3{ MASTER-SLAVE
The available options are:
• Terminal Echo
• Terminal No-Echo
• Master-Slave