User manual

IRD-2900 Series
Professional Integrated Receiver Decoders
Scopus Documents (p/n 100793) Page 3-59
• OPERATIONAL MODE
Displays the currently active mode of operation and allows setting the
mode required (using the following Select Value screen).
Operational Mode
1 MPEGoIp
2{
MPE
The available options are:
• MPEGoIp – MPEG-over-IP mode
• MPE – IP data (MPE de-capsulation)
NOTE
When Operational mode is set to MPEG-over-IP, all other items in the IP-Out-Port menu must be configured.
When the Operational mode is set to MPE, then the IP address, Subnet Mask, and Default Gateway items must
be configured.
• PROTOCOL
Displays the currently active L3 protocol and allows setting the required
protocol (using the following Select Value screen).
Protocol
1 UDP
2{
RTP
The available options are:
• UDP – User Datagram Protocol
• RTP – Real Time Protocol (this feature will be supported in future
software releases)