User manual

User Manual
Front Panel Operation
Page 3-56 (Rev. 2.0 /August 2005)
3.3.6. Data Configuration Menu
The Data Configuration Menu allows setting parameters to handle a data output
stream.
The Data Configuration Menu is entered from the IRD Configuration Main Menu
(see Paragraph 3.3).
High Speed Data Port is supported in IRD-2960 and IRD-2990 models. The
Data Configuration Menu is displayed as follows:
Data 1-2-6
1 Low Speed Data Port
2 High Speed Data Port
IP-Out-Port is supported in all IRD-2900 models, except for the IRD-2960 and
IRD-2990 models. The Data Configuration Menu is displayed as follows:
Data 1-2-6
1 Low Speed Data Port
2 IP Out Port
The Data Configuration Menu parameters are categorized as follows:
• Low Speed Data Port
Contains parameters that allow setting filtering mode to Low Speed Data
(LSH PID) information. For details, see Paragraph 3.3.6.1.
• High Speed Data Port
Contains parameters that allow setting filtering mode to High Speed Data
(HSD PID) information. For details, see Paragraph 3.3.6.2.
• IP Out Port
Contains parameters that define the IP-Out-Port mode of operation as well
as parameters required for MPEGoIP and IPoMPEG (MPE) operations. For
details, see Paragraph 3.3.6.3.
3.3.6.1. Low Speed Data Port
This feature will be supported in future software release.