Instruction Manual

13
The accessories recommended for your inflator are available from your dealer or authorised service
centres.
8.2 ACCESSORIES
9. TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE POSSIBLE SOLUTION
The inflator does
not start
The inflator does
not inflate
Power cable not properly
connected.
No battery voltage.
Hose wrong connection.
The ON button has not been pressed.
Wrong pressure setting.
The device is damaged
Connect the power cable correctly
and with the right polarity (red clamp
to battery positive terminal).
Check battery conditions.
Connect the air hose to the
correct port.
Press the ON key.
Correct pressure setting.
Contact a SCOPREGA service
centre.
The use of any accessory not recommended for this inflator can be dangerous.
WARNING