Instruction Manual
10
MANUALOF
SAVE THIS INSTRUCTIONS MANUAL FOR REFERENCE
2. FOREWORD
Dear customer,
congratulations on choosing Scoprega.
We design and manufacture products of the highest quality to meet the needs
of our customers Scoprega oers the highest quality in service as well. Our
specialised departments provide support and instructions when needed, as well
as comprehensive technical service.
We thank you for your trust.
4. INTRODUCTION
The GE BP-1 is a high-eciency portable electric inflator, which stands for reliability and functionality.
It is equipped with an inflation system allowing inflation at a pressure between 10 and 1200 mbar, and
with a control system ensuring automatic shut-down at the selected pressure.
Read these instructions before using the inflator. Failure to follow all the instructions listed
below may result in damage to the product and/or cause serious injury to persons.
WARNING
DO NOT POWER THE INFLATOR WITH A
VOLTAGE HIGHER THAN THE RATED ONE.
1. Read these instructions.
2. Keep this manual.
3. Thoroughly follow the instructions.
4. Protect the power cable against possible damage.
5. For servicing, contact qualified personnel only.
In the event of problems or damage to the inflator, contact the service centre.
6. Do not disassemble the device. Incorrect reassembly can result in short circuits.
7. Ensure adequate ventilation and avoid placing objects on or around the inflator during operation.
8. Do not block the air vents.
9. The inflator produces vibrations that could make it move. Do not place the device on high surfaces
and monitor its movements.
10. Do not use the inflator with adapters other than those provided in the package since they could
damage the device.
11. Keep the device out of the reach of children.
3. PRELIMINARY WARNINGS