Product guide

81
Power Supplies
POWER SUPPLIES 12 VOLT D/C (continued)
ELMDENE
EN RANGE - EN2: Grade 2, EN3: Grade 3. A range of power supplies designed for use in systems complying with PD6662:2004 and EN50131-6
at environmental class II. All include Deep Discharge Protection and Remote Fault Signalling of EPS, APS and PSU fault conditions. Internal
diagnostic LED indication (no external indication of status as specified by EN50131-1). Remote Maintenance is available as an option on
EN3 PSU’s. Front and Rear Tamper Protection on EN3 psu’s, Front Tamper Protection on EN2 psu’s. Low quiescent battery standby current.
Intelligent active battery monitoring. Box sizes in mm, height x width x depth - A: 200 x 230 x 80, hinge lid. B: 330 x 355 x 80, clam lid.
C: 275 x 330 x 80, hinge lid. F: 380 x 230 x 75, hinge lid. R: 410 x 390 x 90, clam lid.
EN2-07-A. Maximum 1.0A . For systems requiring 7Ah battery (580mA - 12 hours standby). Box size A.
EN2-07-B. Maximum 1.0A. For systems requiring 7Ah battery (580mA - 12 hours standby). Box size B. Will accommodate Communications device.
EN2-17-B. Maximum 1.5A. For systems requiring 17/18Ah battery (1.4A/1.5A - 12 hour standby) Box size B.
EN2-17-C. Maximum 1.5A For systems requiring 17/18Ah battery (1.4/1.5A - 12 hour standby) Box size C.
EN3-07-A. Maximum 1.0A. For systems requiring 7Ah battery (580mA - 12 hours standby). Box size A.
EN3-07-B. Maximum 1.0A. For systems requiring 7Ah battery (580mA - 12 hours standby). Box size B. Will accommodate Communications device.
EN3-07-F. Maximum 1.0A. For systems requiring 7Ah battery (580mA - 12 hours standby). Box size F. Retrofit for ‘SN’ (STU) box.
EN3-07-UKRM. As EN3-07 but with Remote Test input for Remote Maintenance. Box size A.
EN3-17-B. Maximum 1.5A For systems requiring 17/18Ah battery (1.4/1.5A - 12 hour standby). Box size B.
EN3-17-C. Maximum 1.5A For systems requiring 17/18Ah battery (1.4/1.5A - 12 hour standby). Box size C.
EN3-17-UKRM. As EN3-17 but with Remote Test input for Remote Maintenance. Box size C.
EN3-34-R. Maximum 3.0A. For systems requiring 2 x 17Ah battery (2.8A - 12 hours standby). Box size R.
A range of fully rated General Purpose Power supplies with rechargeable battery capabilities (500mA), to conform with EN50130-4 EMC Immunity,
EN 50081-1 EMC Emissions, EN60950 Safety of Information Technology Equipment including electrical business and associated equipment.
Elmdene 1381NU - Unboxed 1.0A to load. Chassis dimensions (mm) 216L x 157W x 80H.
Elmdene 1381NS - Boxed 1.0A to load with single indicator. Box size (mm) 200H x 230W x 80D.
Elmdene 1381N - Boxed 1.0A to load with multi indicator. Box size (mm) 200H x 230W x 80D.
Elmdene 1382N - Boxed 2.0A to load with multi indicator. Box size (mm) 200H x 230W x 80D.
Elmdene 1382M - Boxed 1.0A to load with multi indicator. Box size (mm) 330H x 355W x 80D. BABT approved.
Elmdene 1383N - Boxed 3.0A to load with multi indicator. Box size (mm) 330H x 355W x 80D.
Elmdene 1384 - Boxed 3.0A to load with multi indicator. Box size (mm) 330H x 355W x 80D.
Elmdene 1385N - Boxed 5.0A to load with multi indicator. Box size (mm) 330H x 355W x 80D.
Elmdene 1381SN - Boxed 1.0A to load with multi indicator. Box size (mm) 380H x 230W x 75D.
Menvier Security TS519 XB 1.0A. BABT approved, metal boxed.
MSPSU ‘smart’ power supply unit for M-Series and Scantronic 95EN-00 panels, 1.5A Grade 3 including a 8 zone, 1 programmable output
and up to 4 remote keypads.
Premier PSU200. 2 Amp microprocessor based power supply with fail-safe relay outputs for mains, battery and fuse monitoring. Compatible with
a variety of control panels. Housing will accept 2 x independently monitored 7.2Ah batteries or a single 18Ah battery.
Premier PSU200XP. All the features of the PSU200 with the addition of a built-in Premier 8XP Zone Expander. Provides complete power supply
signalling integration with Texecom Premier Series control panels.
Hinged Metal Box. White powder coated 340mm x 230mm x 75mm.
POWERPLEX
LXM.1000 12 VDC, 1 Amp, boxed power supply
LXM.1500 12 VDC, 1.5 Amp, boxed power supply
LXM.2000 12 VDC, 2 Amp, boxed power supply
LXM.1000EN 12 VDC, 1 Amp, boxed power supply
LXM.1500EN 12 VDC, 1.5 Amp, boxed power supply
LXM.2000EN 12 VDC, 2 Amp, boxed power supply
LXM. 3000EN 12 VDC, 3 Amp, boxed power supply
ST.1000C 12 VDC, 1 Amp, compact boxed power supply
ST.1000H 12 VDC, 1 Amp, standard boxed power supply
ST.1500C 12 VDC, 1.5 Amp compact boxed power supply
ST.2000C 12 VDC, 2 Amp, compact boxed power supply
ST.3000H 12 VDC, 3 Amp, standard boxed power supply
ST.5000V 12 VDC, 5 Amp, vertical boxed power supply
ST.8000L 12 VDC, 8 Amp, large boxed power supply
All above PSU’s available in unboxed chassis-mounted versions or in alternate housings with multiple fused output options.