Product guide

Speech Diallers & Communicators
62
As PD6662:2004 is only concerned with communications to an ARC, no standard exists for the testing or approval of speech diallers.
Cooper Security understands that speech diallers can be used on any system, even a Grade 3, only as a back up to the main approved method
of signalling. As Grades 1 and 2X are mainly for audible-only, a speech dialler can be used as a back-up.
MENVIER SECURITY (2 Year Warranty)
TSD1-UK speech dialler, 8 character starburst LCD display, dials 4 numbers with different messages, up to 40 secs recording time, true NVM for
all programmed information including speech. Call acknowledgement, event log, built-in speaker for instant playback.
TSD2-UK speech dialler, 32 character, blue LCD display, 4 inputs, 2 controllable outputs, dials any combination of 10 telephone numbers, up to
32 secs recording time, true NVM for all programmed information including speech. Call acknowledgement and call abort. Passcode protection, integral
microphone and loudspeaker. BABT approved. Message acknowledgement, event log with current time and date. Ambient temperature sensor and
programmable alarm levels.
SD3-UK GSM speech dialler. GSM version of the SD2. As above, with 8 inputs, 4 controllable outputs. Includes fully-approved GSM module
(No SIM card supplied). Working voltage range from 10.5 to 27.5V.
PYRONIX (2 Year Warranty)
Vocaliser Speech Dialler with voice prompted programming, one common message and four specific messages. Non-volatile memory, optional
battery back-up facility, remotely and locally programmable, two-way communication, record facility, optional line seize relay, c/w microphone.
Vocaliser Microphone Additional microphone, for use with Vocaliser.
SCANTRONIC (2 Year Warranty)
660UK-00 4 channel wire in speech and digital communicator Digi/Dialler stand alone will run on shared equipment link with existing
telecommunications equipment. NVM protected, up to 4 telephone numbers & master message with 4 sub messages can be programmed digitally.
Facility can be accessed remotely. Message repeated 4 times and will attempt to contact up to 15 times. Fits most hardwire and radio control panels.
TEXECOM (2 Year Warranty)
Texecom Speech Dialler with 32 character LCD display for quicker and easier operation. Features 4 trigger inputs, 4 voice messages – each up to
32 seconds in length, dials 8 contact numbers and incorporates 2 programmable outputs. Also includes call acknowledgement, call abort, listen-in mode,
talkback mode, memo feature, context sensitive help, passcode protection, remote access plus upload/download via Wintex software.
Texecom Speech & Text Dialler All the features of the Texecom Speech Dialler plus 4 text messages – each up to 32 characters in length.
Texecom RMU Remote microphone unit for use with Texecom speech diallers.
DIGITAL COMMUNICATORS
BOSCH (3 Year Warranty)
ADV-1 Communicator, approved for use on BT PSTN lines, either BSIA fast format or point iD protocols. Multi compatible with DS two wire protocol
(24 input channels) or Scantronic plug on pin format (7 input channels). Up to 8 inputs, TTL Logic, open collector (with pull up resistor) or relay switched
voltages when standalone, with + or – switched inputs. Two programmable outputs for line faults, acknowledgement, remote transmission or remote reset.
HKC
SW-4/8DC Dialler: Plugs on to HKC panels via ribbon lead. Reports up to 8 channels to Central Station. Reports 4 channels as a standalone dialler. Integral Line
Monitor. Call Status LED. Simple programming via RKP or SecureWatch panel. Grade 2 Class II.
SW-DMTC Dialler: Plugs straight on to HKC panels. Reports up to 16 Fast Format channels to Central Station. Other protocols: Contact ID, SIA & Extended SIA.
Sends SMS messages to up to 19 phones. Connects to remote PC via SmartLink 7. Simple programming through Panel menus. Integral Line Monitor. Call Status LED.
Grade 2 Class II.
GSM-SRMC1 Router: Telephony through PSTN or GSM network. Dual-band. Pre-fitted O2 SIM card for access to O2 Network. 2 inputs including a “Force GSM
call” input. 4 outputs including “GSM fault” and “PSTN line fault”. Connects to SecureWatch panels. Can also operate in standalone mode. Grade 2 Class II.
SCANTRONIC (2 Year Warranty)
08400UK-01 8 channel wire in digital communicator, 3 telephone number dialling facility, line monitor. Programmable NVM chip
utilises network services which eliminates the need for ex-directory ICB (incoming calls barred) telephone line, fitted with line divert relay.
Serial Version i.e. line station facility.
08440UK-01 4 channel wire digital communicator. As above but 4 channel only.
09823UK-00 NVM Chip for use with 07300UK-00 programmer.
660UK-00 Speech and Digital Communicator. 4 channel wire in speech and digital communicator. Digi/dialler stand alone unit will run on shared
equipment link with existing telecommunications equipment. NVM protected, up to 4 telephone numbers & master message with 4 sub messages can be
programmed digitally. Facility can be accessed remotely. Message repeated 4 times and will attempt to contact up to 15 times. Fits most hardwire and radio
control panels.
07300UK-00 programmer for use with all Scantronic communicators using 8 pin programmable chips.
09956EUR-00 ISDN terminal adaptor module. Standard ISDN interface socket (RJ45). Connects to an ISDN wallbox. Standard analogue interface
socket (RJ11) connects to the control panel, line synchronization, and alarm panel hook status. Multiple Subscriber Numbering (MSN), enabled Analogue Caller
Display (CLID), auto dialler and auto answer. Easy to use, all configuration performed via * commands on analogue port. (Not for use on BT Redcare systems).
08740EUR-00 ISDN interface for connecting 7510REUR Homelink 75 control panel to an ISDN network.
08841EUR-00 GSM interface for connecting 7510REUR Homelink 75 control panel to a GSM mobile phone network (no SIM card supplied).
SPEECH DIALLERS (continued)