User manual

MPA-NT Software
ComTec GmbH 6-22
Status window
The same way it is possible to hide or show the status window at the left side of the MPANT main
window.
Save As...
Saves all parameters defined in the Options menu to the MPANT.CNF or a user defined config
file.
Open...
Loads a new configuration.
6.5. Action Menu
The Action Menu or corresponding toolbar icons contain the commands to start, stop, continue
and erase a measurement. If more than one systems are formed, also more actions menus are
available, otherwise they are grayed.
Start
The Start toolbar button erases the data and starts a new measurement.
Halt
The Halt toolbar button stops a measurement.
Continue
The Continue toolbar button continues a measurement.
Erase
The Erase toolbar button erases the data.