User manual

MPA-NT Software
ComTec GmbH 6-14
It provides many choices for the axis of a display. The frame can be rectangular or L-shape, the
frame thickness can be adjusted (xWidth, yWidth). The font size can be chosen between Small
and Large. A grid for x and y can be enabled, the style can be chosen between Solid, Dash,
DashDot and DashDotDot. Ticks on each of the four frame borders can be enabled, the tick
length and thickness can be chosen. The style of the axis labeling depends on enabled ticks at
the bottom respective left side: If no ticks are enabled there, only the lowest and highest values
are displayed at the axis, otherwise the ticks are labeled. 'Use calibration' changes the axis ticks
and labels into calibrated values.
Scaling...
The Scaling menu item or the corresponding icon opens the Scale Parameters dialog box.
Figure 6.15: Axis Parameter dialog box