User manual

Windows Server Program
ComTec GmbH 5-12
For the x Axis and y Axis a parameter and range must be chosen from the respective drop down
list. The time axis can be either the x Axis or the y Axis, select the respective radio button. The
time parameter can be either the 1 msec Real time from the standard real / live timer or the 50
nsec RTC clock when the respective option is available and 'Timestamp in data stream' was
checked in the RTC dialog. Define the Time Offset and Time Bin size in the corresponding edit
fields and Unit selection boxes. A Name can be entered for the new time spectra, or you can left
the 'Name' edit field untouched to choose an automatically generated name like RTC x 1A. If
Conditions are defined, one can be selected as a necessary Condition for incrementing a
channel in this spectra. For zoomed Maps check the x Offset or y Offset checkbox and enter a
value for the respective Offsets and Compression. The Offset point marks the lower left corner of
the zoomed map, and the Compr. by 2^n means the power of two by which the spectra are
compressed. A value of zero means full resolution. For a one-dimensional time spectrum just use
1 for the ADC range.
Press Add Calc from the Map and Calculated Spectra dialog to define a new calculated single
spectrum in the Calculated Spectrum Setting dialog.
Figure 5.15: Multi Time Display Setting