User manual

Windows Server Program
ComTec GmbH 5-5
EC 5 ; Coincidence event flag, data in ADC0 and ADC2 (hex 5)
RTC 576 0 0 ; RTC data rtc0, rtc1, rtc2 (decimal)
The menu item File – A
bout... opens the About MPA3 window where some information of the very
MPA-3 System can be found. Particularly the serial number (ref. Figure 5.6 above the mouse
pointer) is important for support purposes. This serial number is unique for each MPA-3 system.
The MCDWIN menu item in the file menu starts the MCDWIN program if it is not running.
5.1.4. Settings dialog
Clicking in the Settings menu on ADC... item opens the ADC Settings and Presets dialog box.
Here parameters like presets, range parameters, coincidence time, etc. can be set.
In the edit field Range the length of the spectrum can be chosen between 2 and 65536. Set All
sets the range for all ADCs, otherwise each ADC can be selected from the drop down list and
changed seperately. If the checkbox ROIpreset is marked, the measurement will be stopped after
acquiring more events than specified in the corresponding edit field. The events are counted only
Figure 5.6: About MPA3 dialog box
Figure 5.7: ADC Settings and Presets dialog box