User manual

Windows Server Program
ComTec GmbH 5-4
If Replay is enabled in the MPA3 Base module or the Replay Keymodule is connected to LPT1,
the menu item File – R
eplay... opens the Replay dialog (see above for the correct entry in the
mpa3.ini file).
Enable Replay Mode using the checkbox and specify a Filename of a list file (extension .LST)
or search one by pressing Browse... With the radio buttons it is possible either to choose the
complete listfile by selecting All or a selected Time Range. Specify the real time range in
seconds by editing the respective edit fields from: and Preset: . The Replay Speed can be
specified in units of 100 kB per sec. To Use Modified Settings enable the corresponding
checkbox, otherwise the original settings are used. To start Replay press then Start in the Action
menu or the corresponding MPANT toolbar icon. The Replay dialog has an additional Checkbox
"Write ASCII (.als)". It allows to convert the binary listfile into an ASCII file. It has the usual header
and then the listfile data in the following ASCII format (1 line per event tag):
C 0 268 ; Coincidence ADC data in ADC 0 at channel 268 (decimal)
S 1 534 ; Single ADC data in ADC 1 at channel 534 (decimal)
T fff8 ; Timer (msec) event, ADC0..2 are "dead", the others "alive"
; (hex fff8)
ES a ; Single event flag, data in ADC1 and ADC3 (hex a)
Figure 5.4: The Log Options dialog
Figure 5.5: Replay Settings dialog