User manual

Warranty Information

ComTec GmbH II

Warranty Information

FAST ComTec assures that all the data and descriptions in this manual are made to the best of

our knowledge. FAST ComTec is not liable for technical or editorial errors or omissions made

herein. The features and specifications described in this manual are subject to change without

notice.

FAST ComTec warrants proper operation of the software only when used with software and

hardware supplied by FAST ComTec. FAST ComTec assumes no responsibility for modifications

made to this software by third parties, or for the use or reliability of this software if used with

hardware or software not supplied by FAST ComTec. FAST ComTec makes no other warranty,

expressed or implied, as to the merchantability or fitness for an intended purpose of this software.

Software License

You have purchased the license to use this software, not the software itself. Since title to this

software remains with FAST ComTec, you may not sell or transfer this software. This license

allows you to use this software on only one compatible computer at a time. You must get FAST

ComTec's written permission for any exception to this license. A general exception that we grant

here is the offline evaluation of data taken with MPA-3. This is allowed within the working group

on up to 10 seperated computers. The evaluation by replay of list data is restricted and possible

only with the replay licence programmed in the MPA-3 base module or a key module that must be

connected to a parallel port.

Backup Copy

This software is protected by German Copyright Law and by International Copyright Treaties. You

have FAST ComTec's express permission to make one archival copy of this software for backup

protection. You may not otherwise copy this software or any part of it for any other purpose.



 1998-2010 FAST ComTec Communication Technology GmbH,

This manual contains proprietary information; no part of it may be reproduced by any means

without prior written permission of FAST ComTec, Grünwalder Weg 28a, D-82041 Oberhaching,

Germany. Tel: ++49 89 66518050, FAX: ++49 89 66518040, http://www.fastcomtec.com .

The information in this manual describes the hardware and the software as accurately as

possible, but is subject to change without notice.