User`s manual

Schilling Marking Systems GmbH
In Grubenäcker 1 DE-78532 Tuttlingen
[phone] [phone]
[e-mail]
www.schilling-marking.de
MK3 - User’s Manual 41
Detailed operating instructions
In order to enable and/or disenable options, select the appropriate control section by the mouse.
Activated options will be automatically ticked.
5.12 Changing the presentation type
In the tag-dialogue you can enter the basic settings of a tag. To the basic settings belong position and
size, tag type, tag contents, text size and text-alignment as well as options.
Furthermore you can change the presentation type, independent from the features mentioned above.
The following presentation types are distributed:
(also cap. 5.14 „Angular tag and roundset tag“ !)
• Standard tag
• Roundset tag
• Angular tag
To change presentation type, please click with the left-hand mouse key at wanted presentation type.
Should you have selected roundset tag or angular tag, you can change the appropriate datas
(radius,angle). For this purpose please click the „Config“ button.
If the current tag is a roundset tag the so-called „Roundset tag“ dialogue contains following datas that
can be changed now:
• The Center position
• Start Angle and end angle
• Inward radius and outward radius
• Marking direction: clockwise or counterclockwise
For „Angular“- tags the „Angular tag“-dialogue appears on screen after you have clicked on the
„Config“ button. The dialogue contains following datas that can be changed now:
• Position of the left hand top corner of the angular tag
• The angle of displaying
• Height and size of the angular tag
For standard tags the mentioned features are cancelled obviously and the „Config“ button is disabled.
5.13 Changes in text size and text alignment of box contents
You will have noticed that the basic features of a box may be displayed in the ”Box” window. In
addition to position and size, these will also include box type, box contents and options.
Furthermore, the alignment and subsequent font size of the box contents
can be manipulated within a
box irrespective of the box type.
Acknowledge the ”Alignment” options. A ”Box-text alignment” prompts window will be displayed.