User manual

12.3.8 CONTROLLING THE ANGLE OF THE CYLINDER VALVE

The cylinder valve must not be angled in relation to the intersection between the two halves of the handle.

If the angle of the cylinder valve is incorrect, the cylinder pack must be returned to a service technician

approved by Interspiro.

12.3.9 CHECKING THE CYLINDER PACK

If the cylinder pack is lled, it must be equipped with a safety plug that has been tightened with a wrench.

Only a full air cylinder pack may be equipped with a wrench-tightened safety plug. Check that the cylinder

pack does not have any mechanical damage or other defects. If the equipment is defective or damaged, it

must be repaired by a maintenance shop approved by Interspiro.

Additional information about checking air cylinders is available in the Divator Lite User Manual.

12.3.10 CHECKING CYLINDER WEIGHT

Oxidation changes the color of the weight's surface layer. The oxide forms a hard layer that protects the

underlying material. The only check that needs to be carried out on the weight is to make sure that the

handles, twisted thread and spring pin are not damaged or deformed.