User manual

40
6. Detach the BCW hose and remove the Divator BCW or harness from the cylinder pack by pressing in
the locking mechanism on the upper part of the Divator BCW or harness.
M
aintain pressure and pull the carrying handle to loosen the quick coupling.
7. Remove the regulator from the cylinder pack.
8. When the regulator unit is not connected, the cylinder valve must be provided with a safety plug that is
tightened by hand. The regulator connection nipple must be protected with the yellow protective cap.
9
. If the equipment is defective or damaged, it must be repaired or returned to a maintenance shop approved
by Interspiro. Parts that the user can repair personally are described in the repairs section in this user
manual.
1
0. Moist equipment should be properly dried if it is meant to be stored in a bag or sack for a period longer
than a few days.
1
1. Fill the air cylinders in accordance with the description in Chapter 8 “Filling”.