Technical data

fits to the standard ½ inch UNF silencer thread fitted to the end

of our Mk3 and Harrier X. Gloss or matt finish.

Compact Silencer:

The perfect addition to either the Harrier X or Daystate MKIII.

Small and unobtrusive, this small unit delivers excellent sound

reducing qualities and complements the rifle’s clean, sleek

lines.

MFC - Muzzle Flip Compensator:

A series of thirty rear-facing holes considerably reduces barrel

movement on firing, without destabilising the pellet. A set of

plastic baffle inserts are available that convert the MFC into an

efficient silencer.

Woodsman Case:

A high protection rifle bag designed for field use. Opened up it

doubles as a ground sheet or shooting mat. Reinforced

waterproof Cordura™ outer with a tough nylon lining backed

with two inches of impact absorbing foam. Fitted with three

zip-fastened side pockets.

BKL Mounts:

The Mk3 and Harrier X breechblock was designed specifically

for use with BKL mounts. Made from hi-grade aluminium

these scope mounts clamp evenly onto the rifles scope rails

eliminating side misalignment and allow sufficient clearance

for the 10 shot magazine.

Other Accessories:

Polo Shirt:

Yellow with blue trim, 3 embroidered panels

Fleece Jacket:

Black with Yellow trim, 2 Daystate logo’s

Baseball Caps:

Suede Peak 2 Daystate logo’s

Daystate Small Arms Badge:

Sew on, three colour

Separate Charging Hose:

‘A’ clamp or DIN type and Gauge Unit.

Air Cylinders With Hose & Gauge Unit:

3.0 Litre Air Cylinder 232 BAR or 3.0 Litre Air Cylinder 300

BAR

Brass Bolt Handle, Chrome Bolt Handle, Black Bolt Handle

Left-Handed Bolt Handle Machined aluminium

Trigger Guard (not Mk3): Polished Brass

Sling Swivels: QD type

Sling kit: Polypropylene sling plus studs and QD Swivels

Rangefinder Oil:

100 ml Dispenser. Exclusively formulated for Daystate by

Lubro-Teknik. The perfect oil for your Daystate rifle.