Instruction manual

34
ORDERING PARTS
Please contact the Arizona Product Service Department for parts availability and
current prices. All parts ordered for the RUGER
®
MARK III should be sent
to: Ruger, Parts Department, 200 Ruger Road, Prescott, AZ 86301-6181,
telephone: [phone].
We cannot comply with open account or C.O.D. requests. Payment in the form of
a money order, Visa or MasterCard must accompany your order. Credit Card
orders must include the account number, expiration date and whether it is a Visa
or MasterCard account. Minimum parts order is $1.00 plus a $3.50 shipping and
handling charge. Order parts by Part Name and Part Number and include the
entire serial number of the firearm for which the parts are being ordered. There
is a minimum net labor charge of $20.00 plus $30.00 shipping and handling
charge if parts are factory fitted. All factory fitted parts are fit on an exchange
basis only. We will not return the replaced parts.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on
an exchange basis only. We will not return the replaced parts. We will not return
any part that is broken, malfunctioning, badly worn or has been modified. See
“Warning – Parts Purchasers” above.
Because it is a serial-numbered component, the RUGER
®
MARK III pistol
barrel/receiver assembly is defined as a “firearm” by Federal Law and is not
offered for sale separately.
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired.
WARNING –PARTS PURCHASERS
It is the purchaser’s responsibility to be absolutely
certain that any parts ordered from the factory are
correctly fitted and installed. Firearms are
complicated mechanisms and IMPROPER FITTING
OF PARTS MAY RESULT IN A DANGEROUS
MALFUNCTION, DAMAGE TO THE FIREARM, AND
SERIOUS INJURY TO THE SHOOTER AND OTHER
PERSONS. The purchaser and installer of parts
must accept full responsibility for the correct
adjustment and functioning of the pistol after such
installation.
PARTS MUST FIT CORRECTLY