Instruction manual

30
Enclose a letter which includes your name, address, telephone number, serial
number and model of the firearm. Describe in detail the trouble you have
experienced with your firearm, or the work you wish to have done. Merely stating
that the firearm “needs repair” is inadequate information. State precisely what is
wrong. Please enclose copies of any previous correspondence.
Work performed will bear a net minimum labor charge of $20.00 plus a $20.00
shipping and handling charge. The charge for metal refinishing the RUGER
®
MARK II pistol is $50.00 plus a $20.00 shipping and handling charge. Custom
gunsmithing service or nonstandard alterations are NOT AVAILABLE from Ruger
Product Service Departments.
ORDERING PARTS
Please contact the Arizona Product Service Department for parts availability and
current prices. All parts ordered for the RUGER
®
MARK II should be sent
to: Sturm, Ruger & Company, Inc., Parts Department, 200 Ruger Road, Prescott,
AZ 86301-6181, telephone: [phone].
We cannot comply with open account or C.O.D. requests. Payment in the form of
a check, money order, Visa or MasterCard must accompany your order. Credit
Card orders must include the account number, expiration date and whether it is
a Visa or MasterCard account. Minimum parts order is $1.00 plus a $3.50
shipping and handling charge. Order parts by Part Name and Part Number and
include the entire serial number of the firearm for which the parts are being
ordered. There is a minimum net labor charge of $20.00 plus $20.00 shipping
and handling charge if parts are factory fitted. All factory fitted parts are fit on an
exchange basis only. We will not return the replaced parts.
*Parts designated by an asterisk must be factory fitted. These parts are fitted on
an exchange basis only. We will not return the replaced parts. We will not return
any part that is broken, malfunctioning, badly worn or has been modified. See
“Warning – Parts Purchasers” above.
Because it is a serial-numbered component, the RUGER
®
MARK II pistol
barrel/receiver assembly is defined as a “firearm” by Federal Law and is not
offered for sale separately.
CAUTION: A gun containing modified, broken, malfunctioning,
or badly worn parts should not be fired.
WARNING –PARTS PURCHASERS
It is the purchaser’s responsibility to be absolutely
certain that any parts ordered from the factory are
correctly fitted and installed. Firearms are
complicated mechanisms and IMPROPER FITTING
OF PARTS MAY RESULT IN A DANGEROUS
MALFUNCTION, DAMAGE TO THE FIREARM, AND
SERIOUS INJURY TO THE SHOOTER AND OTHER
PERSONS. The purchaser and installer of parts
must accept full responsibility for the correct
adjustment and functioning of the pistol after such
installation.
PARTS MUST FIT CORRECTLY