Specifications

ManualsBrandsscope ManualsGadgetsGEO40A

Contents

I. Pager Layout...................................1

II. Features…………......................... 2

III. Guide to Operation......................5

1. Power On/Off.............................................5

1.1 Power On..................................................5

1.2 Power Off ................................................5

2. Private Messages.................................. ....6

2.1 Read Private Messages ..........................6

2.2 Protect Private Messages ......................8

2.3 Delete Private Messages ........................9

2.4 Memory Full Indication.............. ..........9

3. Public Message.......................................10

3.1 Read Public Message ..........................10

4. Function Setting......................................12

4.1 Time Setting .........................................12

4.2 Alarm Setting .......................................14

4.3 Automatic Power On/Off Setting .......15

4.4 Melody Setting .....................................17

4.5 Contrast Setting....................................18

4.6 Alert Mode Setting ..............................18

4.7 Public Message Alert Mode Setting....19

4.8 Display Memory Occupancy ..............21

IV. Precautions............................ 23

Summary of content (11 pages)

PAGE 1
Contents I. Pager Layout...................................1 II. Features…………......................... 2 III. Guide to Operation......................5 1. Power On/Off.............................................5 1.1 Power On..................................................5 1.2 Power Off ................................................5 2. Private Messages.................................. ....6 2.1 Read Private Messages ..........................6 2.2 Protect Private Messages ......................8 2.
PAGE 2
A. Battery Door B. Battery Lock C. Chain Slot D. Sounder E. LCD display screen F. Read Key G. Right Key H. Left Key I. Selection Key II. Features 1. Max.6 cap codes which can set as Private or Public and individually enabled or disabled. All cap codes are frame independent. 2. Tone type: 24 tone types for numeric, alphanumeric, Tone Only, Disable and urgent call function. 3. 5*8 dot-matrix structure, two-line LCD display, 20 characters can be displayed on each line, 40 characters total. 4.
PAGE 3
11. Private messages can be locked, unlocked and deleted, either individually or all. 12. Repeated message indication " " and indication for message error (blinking erroneous characters) 13. Message time stamping. 14. Receiving alert function settable for each entry of Public message. 15. Unread message indication. 16. No message indication. 17 .Three alert modes: buzzer, motor, mute. 18. In range or out of range indication. 19. Backlight. 20. Low battery indication " " and "LOW CELL" alert.
PAGE 4
III. Guide to Operation 1. Power On/Off 1.1 Power On Press Read key for 2 seconds, the Power Up Message appears, with the sound or vibration alert generated for 16 seconds, or until a key is pressed. 1.2 Power Off 1.2.1 Press Selection key until the Setup menu appears: 1.2.2 Press " " or " " to choose POWER OFF, then press Read key to confirm. 2. Private Messages When a new message is received, the pager will sound or vibrate to alert the user.
PAGE 5
The message is only deemed to be read if the entire message, including the pre-time stamp, is read through to the end. 2.2 Protect Private Message Whilst reading a private message, press Selection key to enter the following screen: Press " " or " " to choose LOCK, then press Read key to confirm locking: To unlock a protected message, press Selection key to display: Press " " or " " to choose YES, then press Read key to confirm unlocking. 2.
PAGE 6
3. Public Messages Public message folders will only be visible if your dealer has enabled them. They are not used for Private (On-Site messaging) purposes. 3.1Read Public Messages Press Selection key until the public message menu appears. (Folder names and number of folders may be different among operators.) Press Selection key or " " or " " to choose the desired MAIL DROP, then press Read key to display the first screen of the first entry in the public message folder.
PAGE 7
will be: Press " " or " " to change hour, minute, time format, date and day. Press Read key to set the next item until the last one (i.e. day), then press Read key to finish setting. The pager will detect automatically, with very short sounds or vibrations to indicate errors to the user if there is a mistake when setting the date, e.g. setting 31 days in February. Note: Whilst setting, press Selection key to exit from Setup menu without saving settings. 4.
PAGE 8
If 24-hour format is selected by the user in the “TIME” menu, the auto on/off setting screen will be: press " " or " " and Read key to set Automatic On/Off ( i.e. "ENABLE" or "DISABLE"), and Power On/Off time. The time on the left is the power on time. The time on the right is the power off time. Press Read key to set the next item until the last one. If an invalid setting is made, the pager will sound or vibrate and return to the initial setting status automatically to alert the user to reset (e.g.
PAGE 9
Press " " or " " to select CONTRAST, then press Read key to enter "SET CONTRAST": " to adjust LCD contrast, Press " " or " then press Read key to confirm. 4.6 Alert Mode Setting Press Selection key to enter Setup menu: Press " " or " " to select ALERT, then press Read key to enter the relevant Setup status: Press " " or " " to select alert modes of BUZZER, MOTOR or MUTE, then press Read key to confirm. Note: the pager may have been pre-programmed in one mode only. If in doubt, check with your dealer. 4.
PAGE 10
represents alert off. Press Selection key to exit when finished. The folder position on this screen follows the folder position in Public Message Menu. Positions 1-4 means the first 4 folders on the first page of the menu, positions 5-8 means the 4 folders on the second page of the menu. For example, position 3 on this screen means the folder at the bottom left of the first page of Public Message Menu, position 6 here represents the folder at the top right of the second page of the menu. 4.
PAGE 11
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one more of the following measures: z Reorient or relocate the receiving antenna.