Installation manual

DataPage Lite (USA) Desktop UHF Radio Paging System
DPUSAlite 10/01 5 Issue 1
Contents of this box:
DataPage Mk 2 UHF Base Station
AC Adaptor
Internal Antenna
Manual
Supplied separately, to order:
Numeric Display Pagers, Vibrate Only Pagers, Vibrating Coasters
Optional External Aerial/Coaxial Cable (See Section: Other aerials)
Before attempting to use this equipment, please read the instructions carefully.
WARNING ! Operating the system without an antenna can cause extensive damage.
Base Equipment make and model: DataPage Lite
Transmitter FCC ID: JRNUSASERILINK
Transmitting Frequency: 457.575 MHz or 457.550MHz*
Effective Range: Up to 1/2 mile with standard aerial!
*or as specified on separate configuration sheet
!optional external aerials and amplifiers available for greater range
Description:
This unit provides keyboard entry of data for tone only or numeric message transmission. The data entry
sequence allows for the insertion of a specific beep type where required, if the send key is pressed without
applying a beep type the unit will send its default setting.
Some major points to remember when installing the equipment:-
♦ Never install aerials near to overhead power lines or adjacent to telephone or public address or data
communication lines.
♦ Avoid, wherever possible, running aerial feeder cables alongside other cables e.g.: telephone and mains.
♦ Avoid mounting the transmitter in the immediate vicinity of telephones, exchanges or computer equipment. A
few feet can make the world of difference in avoiding interference from the radio frequency generated by the
transmitter.