User manual

ConneXions II V8 (Euro), Multi Port Version

CONX8E/3 Issue 3

System Specification

Mains Input: 230V 50Hz

Mains Power Consumption: 6W max

System Operating Voltage: 13.8V dc

System Power Consumption: less than 50mA standby, 300mA (transmit)

Transmitter:

Power output: 500mW

Frequency Range: 450-470 MHz

Channel Spacing: 25 KHz or 12.5KHz

Adjacent Channel: better than 200nW @ 4.5 KHz deviation

TX Baud Rate: 512 or 1200

RF Standards applied: ETS 300 224

Notified Body Ref. No: 0891

Type Designation: SERILINK

EMC Standards applied: ETS 300 682

General:

Ports: RS232 serial on PL1, PL2 and PL3

Optional 10 way dry contact I/F on PL1

Comms Baud Rate: PL1, PL2: 1200 Baud. PL3: 9600 Baud*

Footprint (mm):

328 (L) x 190 (W) x 75 (D) max

*dependent on system configuration

excluding aerial

Scope’s policy is one of continuous development and specifications are subject to change without notice