Service manual

OpenScape Business V1
Sales Information Page 77 04.06.2013
1.12.1.3 License Migration for TDM Stations
In OpenScape Business, subscriber licenses of type "TDM User' are required for all TDM stations
(UP0, a/b, S0, DECT). No new licenses need to be purchased for existing TDM stations.
During the CDB conversion, the number of active TDM stations in the HiPath 3000 system is
determined automatically. The required TDM User licenses are then automatically added to the
new OpenScape Business license file that is generated during the upgrade at the Siemens
Central License Server
The number of TDM user licenses is determined as follows:
– 1x TDM User license for each active UP0 port - Phone ready, call number available
– 1x TDM User license for each active DECT phone - Call number available
– 1x TDM User license for each active a/b port (call number) for inserted boards
– 1x TDM User license for each active S0 port (call number) for active boards
The CDB conversion can only be performed
once. The steps for the technical migration must
hence be followed precisely. A description of how to perform the migration can be found in:
Administrator Documentation, Licensing.
1.12.1.4 Products and Features without License Migration
HiPath 3000 products and features that cannot be migrated to OpenScape Business
No migration is performed for the following products and features:
– OpenStage Gate View on the Plug PC can continue to be operated with OpenScape
Business.
– HG1500 B-channels are dropped, since they are integrated on the new mainboard
– optiClient Attendant V8: does not run on OpenScape Business.
– optiClient BLF V1/V2: does not run on OpenScape Business.
– HiPath TAPI 120/170 V2: does not run on OpenScape Business.
– The Entry VoiceMail module is dropped, since it is integrated on the new mainboard
– Entry Web Services Communication Clients of the Plug PC
– HiPath 3000 BS4: licenses for base stations are no longer required.
1.12.1.5 Additional Notes
Please note the following additional information:
– In OpenScape Business systems, all user-oriented licenses are permanently assigned to call
numbers and are thus bound to a user.
1.12.1.6 Licensing Procedure for Migration of an Internetwork
An existing HiPath 3000/5000 internetwork with a shared network license file must be split into
standalone systems with individual license files at the CLS. After this, each node is upgraded and
licensed as a standalone system. If necessary, the OpenScape Business systems can then be
recombined into an internetwork with a single network license file at the CLS.
1.12.2 Changed/Enhanced Features and Interfaces
Some HiPath 3000 features and interfaces have been adapted for OpenScape Business and
enhanced in functionality.
Enhanced SIP Functionality
The following SIP features have been additionally implemented as compared to HiPath 3000 V9:
– Call completed elsewhere
– Message Waiting Indication for Voicemail
– Calling Name Presentation (CNIP)
– Distinctive Ringing (internal/external calls)
– 3rd Party Call Control
– Call Forwarding busy/no reply/unconditional (handset controlled)
Extension of SIP Trunking
To connect external SIP servers (e.g., OpenScape Alarm Server, HiPath 4000, OpenScape Voice
or UC Suite) two SIP routes are available in OpenScape Business (as opposed to only one SIP