Service manual

OpenScape Business V1
Sales Information Page 32 04.06.2013
– no 1 1 – 1 2 (1 x
U
P0/E
)
2 (1 x
U
P0/E
)
– 2 (1 x
U
P0/E
)
8 no
X3R, X3W
X5R, X5W
– yes 7 – – 7 4 (1 x
U
P0/E
)
– – 4 (1 x
U
P0/E
)
32 yes
X5W 1 x
SLC16N
no 16 – 16 16 4 (1 x
U
P0/E
)
– 12
(3 x
U
P0/E
)
12
(3 x
U
P0/E
)
64 Yes
X8 4 x SLCN no 64 – 64 64 4 (1 x
U
P0/E
)
– 12
(3 x
U
P0/E
)
12
(3 x
U
P0/E
)
250 yes
1.3.5.7 Cordless IP
Cordless IP (IP DECT) is the optional Cordless solution that serves as an alternative to the
integrated Cordless solution or is used with OpenScape Business S.
The wireless technology in the Cordless IP solution corresponds to the DECT standard. This
established DECT Standard for mobile voice communications is now available in voice-over-IP
infrastructures. This enables DECT radio cells to complement SIP-enabled voice-over-IP systems
perfectly as a basis for mobile communication solutions.
The DECT phones at Cordless IP communicate via the BSIP base station with the
communication system like SIP phones. Consequently, only SIP features can be used with
Cordless IP. For more information on Cordless IP, refer to the documentation for HiPath Cordless
IP.
For details on the supported features, see:
http://wiki.siemens-
enterprise.com/wiki/call_feature_overview_for_HiPath_Cordless_IP_with_different_platforms
The same Cordless phones can be used for the integrated Cordless solution as well as the
Cordless IP solution; see also the section on Supported Phones.
1.3.6 Attendants and Company AutoAttendant
Depending on the selected UC solution (UC Smart or UC Suite
S2
) different Attendant clients are
available to you (as an Attendant Console). OpenStage Business is the Attendant client for UC
Smart. The recommended client for UC Suite is myAttendant
S2
, but the OpenScape Business
Attendant can also be optionally used here.
1.3.6.1 Business Attendant
The classic Attendant Console ideally integrated on a PC: pending calls, active calls, calls on hold
and parked calls, everything always visible at a glance. In addition, information is available on the
busy status of the extensions as well the presence status of the subscribers. The status of a
subscriber can also be changed via the Business Attendant. All functions can be performed via
the keyboard of the PC or with mouse clicks. The busy lamp fields for subscribers can be
individually customized and thus used to optimize the workflow.