User Manual

ConneXions CX5 Mains, Multi Port Version
CX5 Issue 2
Page 12 of 14
System Specification
Mains Input: 100-240V ac @ 50/60 Hz
Mains Power Consumption: 6W max
System Operating Voltage: 13.8V dc
System Power Consumption: less than 50mA standby, up to 2.4A (transmit)
Transmitter:
Power output: 0.1W to 5W max
Frequency Range: 446-464 MHz
Channel Spacing: 12.5 KHz
Adjacent Channel: better than 200nW @ 4.5 KHz deviation
TX Baud Rate: 512 or 1200
RF Standards applied: FCC Pt 90
EMC Standards applied: FCC Pt 15
FCC ID: JRNUSASYNLINK
General:
Ports: RS232 serial on COM1, COM2 and COM3
USB. 8 way dry contact I/F
Comms Baud Rate: 600 to 9600 software adjustable*
Footprint (mm): 330 (L) x
190 (W) x 70 (D) max
*dependent on system configuration
excluding aerial
Scope’s policy is one of continuous development and specifications are subject to change without notice