User Guide

9
4. Common questions and answers
a. Why is the silent sleep tracker not detected?
Answer: The commonly used sleep locator works once a day, and only
works for 5-7 minutes at a time, so when the detector is detecting
wireless signals, the locator may not send a signal.
b. Why is the position of the real-time locator not accurately
detected?
Answer: The real-time locator generally sends a signal every 10
seconds. Please do not move back and forth during detection. It is
best to fix it in one position for more than 5 minutes, and then change
to another position to continue detection.
c. Why does the detector terminal beep "DiDi"?
Answer: Signals are everywhere, and there are too many sources of
interference signals. It is recommended to turn off your own known
signal sources, such as mobile phones, WIFI routers, etc., during
detection, and then decrease the sensitivity appropriately.
d. Why do the detectors near the windows of the house make such a
loud noise?
Answer: The window is made of aluminum alloy, which forms a loop