User Guide

7
3. Operation methods
a. Detection of radio waves (wireless cameras /eavesdroppers, etc.)
(1) Press and hold the power switch
for 3-5 seconds, after
hearing the "beep" sound, release your finger and the blue indicator
light will turn on, and the default detection wireless signal detection
mode will be turned on.
(2)If the blue light is flashing and there is a voice prompt, it means
there is an emission source.The more blue light signal indicators, the
stronger the signal.
(3)Click the button to adjust the sensitivity, the more blue lights,
the higher the sensitivity, which can expand the search range
(4)Cyclic adjustment: Adjust the sensitivity button to reduce the
number of blue lights, reduce the sensitivity, reduce the detection
range, and finally find the emission source.
(5)You can also turn on the vibration mode, press the power button
to switch, and vibrate once.
b. Detect hidden cameras
（
recommended to turn off the room lights
）
(1)Short press the "mode button"
, the 3 infrared lights at the
back will light up, short press the sensitivity adjustment button
to control the flashing speed of the red light. Each time you press
the LED sensitivity button, the flashing frequency will be one step