User`s manual

Inserting a SmartMedia Card (continued)
Insert the SmartMedia card as shown in the illustration below. The Dazzle ZiO! can only accept
3.3V SmartMedia cards. Notice the notched corner of the SmartMedia card. The location of the
notch for a 3.3V SmartMedia card will appear on the right-hand side when you are looking
directly at the gold contacts from the top - refer to the illustration at the bottom of the page.
Flip the card over and be sure to insert the (3.3V) SmartMedia card with the gold contacts
facing down (therefore the notch will now be located on the left when the gold contacts are
face down).
IMPORTANT NOTE: 5V SmartMedia cards are not supported with the ZiO! SmartMedia
card reader.
USER'S
MANUAL
USER'S
MANUAL
?
HELP

CONTACT

NEXT
BACK

CONTENTS
31
™
Left notch
indicates 5V card
Right notch
indicates 3.3V card
Write protect area
Gold contacts
Gold contacts
Write protect area
SmartMedia Card Comparison (view of cards from top)
Insert card with the notched corner
head first and the gold contacts face
down.
NOTE As shown on the left, you
should not see the gold contacts or
write protect area when inserting the
card with the ZiO’s! label facing up.
5V SmartMedia cards
(NOT COMPATIBLE)
3.3V SmartMedia cards
(COMPATIBLE)