User`s manual

Installing the Driver Software and OnDVD Software on Windows 98, Me and 2000
The Dazzle ZiO! is relatively easy to install and operate. To avoid complications during the
installation process, please follow the steps in order as described in this chapter. Before con-
necting and using the Dazzle ZiO!, you must first install the driver software located on the
accompanying Dazzle Installation CD.
IMPORTANT NOTE: For the ZiO! MultiMediaCard/Secure Digital and Memory Stick readers,
driver installation is only required for Windows 98/98 SE and is not required for Windows
2000/Me. You may install both the Dazzle OnDVD Software as well as Acrobat Reader software
from the installation menu without installing the driver software. Driver installation is required for
the ZiO! SmartMedia and CompactFlash readers.
NOTE: The screenshots below may vary slightly from those on your computer.
Start your computer running Windows 98, 2000,
or Me. Please close any open applications. Insert
the Dazzle Installation CD.
The auto run program will then launch the setup
application automatically. If the installer does not
begin automatically, double-click on "My
Computer." Next double-click on the drive corre-
sponding to your CD-ROM, then double-click on
the "Setup.exe" file to begin.
A menu will appear with several options (as
shown on the top left). Select "Install Drivers"
from the first menu. NOTE: from this menu you
can also install Acrobat Reader, the Dazzle OnDVD
software, as well as view the User’s Manual.
On the next screen (as shown on left), select the
ZiO! model you purchased from the four models
displayed. (CompactFlash, MultiMediaCard/
Secure Digital, SmartMedia and Memory Stick).
USER'S
MANUAL
USER'S
MANUAL
?
HELP

CONTACT

NEXT
BACK

CONTENTS
21
™
Click Install Drivers.
1.
2.
3.