User`s guide

Dazzle Digital Video Creator 150 User’s Guide • Getting Started • Page 13
Hardware Installation
After you install the DVC 150 software, you can install the hardware.
Installing the DVC 150 hardware is an easy, two step process, as described below.
1. Connect one end of the AC power cord to the back of the DVC 150 and the other end
to an electrical outlet.
To avoid damaging your DVC 150, use only the supplied power adapter.
2. Connect one end of the supplied USB cable to the USB port on the back of the
DVC 150, then connect the other end to the USB port on your computer.
Note: Make sure the cable ends are positioned correctly when connecting.
Power Adapter
DVC 150
USB Port
USB Cable
USB Port