User guide

4) Dial the telephone number to be stored, up to 22 digits. These digits may
be 0 - 9
WXYZ
, * , # , FLASH and PAUSE , each of which is counted as
one digit.
5) Press the desired one-touch speed dial key (M1 ~ M9) to store the dialed
number in memory.
6) To change a stored number, repeat the instructions above and the new
telephone number will replace the previously stored number.
Making calls with the One-Touch Speed Dial Keys (M1~ M9):
1) Pick up the handset or press SPKR and listen for dial tone.
2) Press the desired one-touch speed dial key M1~M9; the stored number
will be dialed automatically.
Viewing Caller ID entries:
The STC-7003 telephone stores Caller ID data for the last 60 calls received,
including “UNAVAILABLE” and “BLOCKED” calls.
1) Press ▼ to view calls starting with the newest call.
2) Press ▲ to view calls starting with the oldest call.
3) Repeatedly press the ▲ or ▼ button to scroll through the call list as
desired.
Deleting entries from the Caller ID list:
Deleting a single Caller ID entry:
1) Press ▲ or ▼ as needed to select the Caller ID entry to be
deleted.
2) Press DEL. “DELETE CALL ? ” will be displayed on the LCD.
3) To cancel without deleting the selected entry, press ▲ or ▼
4) To continue deleting the selected caller ID entry, press DEL.
Deleting all Caller ID entries:
1) Press the ▲ or ▼ to display any caller ID entry.
2) Press and hold DEL for at least 3 seconds, until the LCD displays
“ERASE ALL CALL?”
3) To cancel without deleting any calls, press either ▲ or ▼.
4) To continue deleting all entries, press DEL. All entries will be deleted and
“NO CALLS” will be displayed on the LCD.
Dialing using a Caller ID entry:
On-hook:
1) Press ▲ or ▼ to select the caller ID entry to be dialed.
2) Press DIAL. The LCD will display “PICK UP OR ADJ ” for 10 digit
numbers, or “PICK UP PHONE ” for 7 digit or 11 digit numbers.
3) To adjust the phone number, press DIAL. For instance, a 7-digit local
number sometimes cannot be dialed because it requires a 10-digit or
11-digit format. Press DIAL repeatedly to scroll through the 7, 10, and
11-digit numbers.
4) To dial the displayed number, pick up the handset or press SPKR. The
LCD will display “DIALING ...” and the number will be dialed automatically.
Off-hook:
With Local Area Code programmed:
1) Select the telephone number variation to be dialed using the ▲ and ▼
keys.