User guide

To set user options:
Verify that the phone is connected to a functioning telephone line. Verify that
the phone is “on-hook” and that it is in standby mode. In standby mode, the
time, date, new call count, and user name (“SCITEC INC.” by default) will be
displayed on the LCD. User options are set as follows:
1) Press SET to enter user options setup mode and to select the
CONTRAST menu. (Note: Once in user options setup mode, you must
press a key at least once every 10 seconds or the telephone will
automatically revert back to standby mode. If this happens, simply press
SET and repeat the user options setup sequence.)
2) Press ▲ or ▼ to select the desired LCD contrast (1-8)
3) Press SET to confirm and to select the SET TIME/DATE menu.
4) Press ▲ or ▼ to set the hour (1-12)
5) Press SET to confirm and to select minute
6) Press ▲ or ▼ to set minute (0-59)
7) Press SET to confirm and to select month
8) Press ▲ or ▼ to set month (0-12)
9) Press SET to confirm and to select Day
10) Press ▲ or ▼ to set day (1-31)
11) Press SET to confirm and to select SET NAME menu.
12) Press ▲ or ▼ to position the cursor for each character to be set.
13) Press the following keys alternatively to select characters in the name to
be set:
• 1 to select “▼”, “▲”, “:”, or “1”
• 2
ABC
to select “A”, ”B”, “C”, or “2”
• 3
DEF
to select “D”, ”E”, “F”, or “3”
• 4
GHI
to select “G”, ”H”, “I”, or “4”
• 5
JKL
to select “J”, ”K”, “L”, or “5”
• 6
MNO
to select “M”, ”N”, “O”, or “6”
• 7
PQRS
to select “P”, ”Q”, “R”, “S” or “7”
• 8
TUV
to select “T”, ”U”, “V”, or “8”
• 9
WXYZ
to select “W”, ”X”, “Y”, “Z” or “9”
• 0 to select space “ “, period “.”, slash “/”, or “0”
• * to select “(”, ”)”, semicolon “;”, or plus “+”
• # to select “<”, ”=”, “>”, or “?”
14) For example, to enter “ABEL” as the name:
• Press ▲, 2
ABC
to enter an “A”
• Press ▲, 2
ABC
to enter a “B”
• Press ▲, 3
DEF
, 3
DEF
to enter an “E”
• Press ▲, 5
JKL
, 5
JKL
, 5
JKL
to enter an “L”
15) Unused positions may be erased by pressing * then 0 .
16) Press SET to confirm and select SET LOCAL NUM. menu.
17) Press ▲ or ▼ to position the cursor to the display digit to be set.
18) Use the digit keys 0 to 9
WXYZ
to select each digit of the telephone
number. Use the # key to enter a dash “-“
19) Press to confirm and select the LOCAL AREA CODE menu.
20) Press ▲ or ▼ repeatedly to set the first area code digit (0-9)
21) Press SET to confirm and to select the second area code digit
22) Press ▲ or ▼ repeatedly to set the second area code digit (0-9)
23) Press SET to confirm and to select the third area code digit