User guide

(600ms , 300ms or 100ms)
11) RD - Redials the last-dialed telephone number
12) PAUSE - Used to enter a pause during speed dial key programming
13) SPKR - Sets the hands-free speakerphone function on or off. The LED
located above this key lights when the speakerphone is on.
14) RINGER - Slide switch on rear of telephone to set ringer volume high, low
or off.
15) VOLUME - Slide control for adjusting the speakerphone receive volume.
This control is located on the right side of the telephone.
16) HOLD – Functions as “local hold” key or a programmable “system hold”
key, depending on the user option setup. As a local hold key, the
telephone holds the line off-hook when the handset placed in the cradle.
As a “system hold’ key, this key functions as a programmable speed dial
key that may be programmed with the PBX “system hold” DTMF
sequence. When using “system hold”, the line hold function is provided by
the PBX system itself and not by the telephone. Please consult your PBX
system vendor or installer for more information on the usage of this key.
17) MUTE - Turns off transmitted audio from both the speakerphone and the
handset/headset microphones for privacy. An LED indicator illuminates
when the mute function is turned on. With the MUTE function turned on,
you will be
able to hear the party at the other end of your call,
but they will not be able to hear you.
18) Message Waiting Indicator: Lights up when a voice-mail message is
waiting for the telephone user and the telephone is on-hook. To use this
feature, the PBX must support one of the following types of
message-waiting light signaling:
• NEON/90V
• AT&T/Lucent /Avaya/Low Voltage LED
• Centrex/CLASS/VMWI/FSK
Use of this message waiting indicator requires proper programming of
your PBX and voice mail system. Please consult your PBX vendor or
installer for more information.
Operating instructions:
Telephone Options Setup:
The user options should be set on the STC-7003 telephone prior to placing it
into service. The following eleven options are user-programmable on the
STC-7003:
• LCD contrast level (1-8)
• Real-time clock time and date (hour, minute, month, and day)
• User name (up to 15 characters)
• Local telephone number (up to 14 digits)
• Local area code (3 digits)
• PBX prefix (1 digit)
• Caller ID on call waiting (on or off)
• Voice Message Service Selection(on or off)
• Hold mode (local or PBX)
• Flash time (600ms, 300ms, or 100ms)
• Pause time (2.2 or 3.6 seconds)