User guide

Telephone Features:
• High performance voice-switched (half-duplex) speakerphone with in-use
LED indicator.
• Feature keys for flash, hold, redial and mute functions.
• Nine user-programmable speed-dial keys.
• Message waiting light responds to NEON/90V, AT&T/Lucent /Avaya/Low
Voltage LED, and Centrex/CLASS/VMWI message waiting light signaling
formats.
• Electronic ringer with three-position volume control. (OFF, LOW, and
HIGH)
• Separate volume controls for handset and speakerphone.
• Data port jack for connecting another device to the extension, such as a
computer modem, fax machine, or credit card terminal.
• 2.5mm phone jack for connecting a standard telephone headset.
Caller ID Features:
• Caller ID function is telephone line-powered. AC adaptors or batteries are
not required.
• Caller ID Type I (on-hook) and Type II (call waiting) compatible. Caller ID
Type II may be disabled if desired.
• Retains up to 60 messages in memory
• High-contrast three line LCD display displays name (up to 15 characters),
telephone number (up to 14 digits), date, and time simultaneously
• Programmable 3-digit local area code; automatically prefixes
long distance telephone numbers with a “1” when using
one-touch dial back. Caller ID number may be called back as recorded or
prefixed with a selected PBX code.
• Two Caller ID delete modes: single call or all calls
• Real time clock with 12-hour format is automatically set by an incoming
call or may be set manually if desired
Installation:
The STC-7003 telephone is designed for use behind a registered PBX
system. The telephone user or system installer must supply an RJ-11
6-position 2-wire modular wall jack to connect this telephone to the PBX
system. The PBX “station port” type must be “Industry Standard Analog” or
“POTS.” This telephone cannot be used with “digital” PBX station ports.
Unpacking your telephone:
Verify that the package contains the following supplied items:
• Telephone base unit
• Handset
• Coiled handset cord
• Straight line cord
Assembling your telephone:
If you will be wall-mounting the STC-7003, it is best to do the conversion