STC-7003 Telephone User Guide
telephone number (up to 14 digits), date, and time simultaneously Telephone Features: • • Programmable 3-digit local area code; automatically prefixes long distance telephone numbers with a “1” when using one-touch dial back. Caller ID number may be called back as recorded or High performance voice-switched (half-duplex) speakerphone with in-use LED indicator. prefixed with a selected PBX code. • Feature keys for flash, hold, redial and mute functions.
before connecting the handset and line cords. If you will be using the STC-7003 on a desktop, skip to the section “Attaching the handset” Attaching the handset: Connect the supplied coiled handset cord between the jack on the end of Wall-mounting your telephone: handset and the jack marked with a “handset” symbol on the left side of the 1) The wall/desk handset clip is located on the front of the phone directly telephone base unit.
• NEON/90V (600ms , 300ms or 100ms) • AT&T/Lucent /Avaya/Low Voltage LED 11) RD - Redials the last-dialed telephone number • Centrex/CLASS/VMWI/FSK 12) PAUSE - Used to enter a pause during speed dial key programming Use of this message waiting indicator requires proper programming of 13) SPKR - Sets the hands-free speakerphone function on or off. The LED located above this key lights when the speakerphone is on. your PBX and voice mail system.
• To set user options: • 2 ABC to select “A”, ”B”, “C”, or “2” 3 DEF to select “D”, ”E”, “F”, or “3” Verify that the phone is connected to a functioning telephone line. Verify that • 4 GHI to select “G”, ”H”, “I”, or “4” the phone is “on-hook” and that it is in standby mode. In standby mode, the • 5 JKL to select “J”, ”K”, “L”, or “5” time, date, new call count, and user name (“SCITEC INC.” by default) will be • 6 MNO to select “M”, ”N”, “O”, or “6” displayed on the LCD.
24) Press ▲ or ▼ repeatedly to set the third area code digit (0-9) 25) Press SET to confirm and to select the SET PBX PREFIX menu. 26) Press ▲ or ▼ repeatedly to set the PBX prefix digit (0-9 or none) 27) Press SET to confirm and to select the CALL WAITING? menu. 28) Press ▲ or ▼ repeatedly to set the Caller ID on call waiting feature ON or Placing a call on hold (local hold mode): a. Using handset/headset: Press HOLD, then place the handset in its cradle. b. Using speakerphone: Press HOLD.
4) Dial the telephone number to be stored, up to 22 digits. These digits may 3) To cancel without deleting the selected entry, press ▲ or ▼ - 9 WXYZ , * , # , FLASH and PAUSE, each of which is counted as 4) To continue deleting the selected caller ID entry, press DEL. be 0 one digit. Deleting all Caller ID entries: 5) Press the desired one-touch speed dial key (M1 ~ M9) to store the dialed number in memory.
2) If the displayed number is 10 digits, press the DIAL and the LCD will must be used for speaking and listening. To use the handset again, unplug the display “DIALING ...”. The selected 10 digit number will be prefixed with a headset from the telephone. When using a headset, the handset hook switch “1” and dialed automatically. controls the on-hook or off-hook state of the phone. Remove the handset from 3) If a prefixed “1” is not desired, press and hold the DIAL key for 2 seconds.
Required FCC Notice: This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. The REN is used to determine the number of devices that may be connected to a telephone line.