Owner`s manual

TOYOTA Scion xB REFERENCE 500CF
Procedure
Issue A 10/05/11 Page | 9
4. Using a 10mm socket wrench, remove the four
(4) bolts holding the radio in place. (Fig. 6-5)
5. Disconnect connectors and antenna lead.
(Fig. 6-6)
6. Remove radio and store.
c. Run the Passenger-side of Quick-Sync Harness and
Driver-side Subwoofer Umbilical Cable.
1. Enter through the radio cavity and run harness
together with the driver side subwoofer
umbilical cable (white 4-pin connector first)
through the space above the air conditioning
unit in the direction of the passenger side kick
panel. Run neatly and out of the way. Use cable
ties as necessary. (Fig. 6-7)
2. Locate and remove the 10mm ground bolt
located in the passenger side kick panel area.
(Fig. 6-8)