Owner`s manual

TOYOTA Scion xB REFERENCE 500CF
Procedure
Issue A 10/05/11 Page | 8
6. Quick-Sync Harness Installation
a. Glove Box Removal
1. Open glove box and disengage the glove box
damper on the right side. (Fig. 6-1)
2. Squeeze sides of glove box and pull down and
out in one motion to remove. (Fig. 6-2)
b. Radio Removal
1. Lay down protective blanket over climate
controls and transmission area.
2. To remove the radio trim panel, open the two
vents on the sides of the radio, reach your
fingers inside the vents, and pull straight out.
(Fig. 6-3)
3. Remove the small trim piece below the radio by
pulling straight out. (Fig. 6-4)