Owner`s manual

TOYOTA Scion xB REFERENCE 500CF
Procedure
Issue A 10/05/11 Page | 5
7. Use panel tool to disengage the clips behind the
door panel one at a time. Start at the bottom,
then the sides and finish at the top. (Fig. 4-6)
Note: Use gentle force to remove door panel.
8. Remove door latch assembly from door panel.
(Fig. 4-7)
9. Carefully remove entire door panel and set
aside on a protective blanket. Repeat this
process for remaining doors.
Note: Some door panel snaps may still be
attached to the sheet metal. Remove the
snaps using the forked end of your panel tool
and place it back on the door panel.
b. Remove Front Driver and Front Passenger Side
Threshold Panel. Fig. 4-8)
Note: Disengage both ends of the panel before
pulling upward.
c. Remove Driver and Passenger Kick Panel Trim by
disengaging snaps and pulling away from position.
(Fig. 4-9)