Owner`s manual

TOYOTA Scion xB REFERENCE 500CF
Procedure
Issue A 10/05/11 Page | 14
2. Run the cable under the carpet and exit under
the seat through the opening used by the
existing factory wiring. (Fig 8-2)
b. Passenger side subwoofer umbilical cable
1. Run the passenger side subwoofer umbilical
cable (shorter cable) through the passenger
side kick panel area with the white 4-pin
connector first. (Fig. 8-3)
2. Unfasten white plastic carpet clips along the
threshold area and lift carpet edge to expose
cable route. (Fig. 8-4)
3. Run the cable under the carpet and exit under
the seat through the opening used by the
existing factory wiring. (Fig 8-5)