Owner`s manual

TOYOTA Scion xB REFERENCE 500CF
Procedure
Issue A 10/05/11 Page | 13
4. Apply heat to activate the solder and heat
shrink insulator for the best connection
possible. (Fig. 7-9)
5. Insert 14 ga. wire into the Blue butt connector
and crimp. (Fig. 7-10)
Note: Use appropriate Crimp Tool
6. Apply heat to activate the solder and heat
shrink insulator for the best connection
possible. (Fig. 7-11)
7. Secure using cable ties as necessary.
e. Repeat for the other 14 ga. Power wire.
8. Install Subwoofer Umbilical Cables (…continue from
Section 6, Step D-3-pg. 10)
a. Driver side subwoofer umbilical cable
1. Unfasten white plastic carpet clips along the
threshold area and lift carpet edge to expose
cable route. (Fig. 8-1)