Owner`s manual

TOYOTA Scion FR-S System 400
Procedure!
Issue A 06/01/12 Page | 7!
! !
!
!
4. Use a plastic panel tool to remove the push in
snap at the bottom of the rear panel.
(Fig. 4-7)
!
!
5. Located in the trunk area, pull both backrest
release straps to fold the backrest down.
(Fig. 4-8)
6. Use a plastic panel tool and remove the two
push in snaps at the rear of the panel.
(Fig. 4-9)
7. Carefully disengage the snaps one by one and
pull the rear panel towards you and away to
remove. (Check the panel for missing snaps -
may still be attached to vehicle). (Fig. 4-10)
8. Repeat steps 1-7 for the other side of the
vehicle.
Fig.&5(9&