Owner`s manual

TOYOTA Scion FR-S System 400
Procedure!
Issue A 06/01/12 Page | 5!
! !
!
!
3. Use a 10mm socket to remove the (4) bolts
securing the radio. (Fig. 3-3)
4. All radio connectors have a locking tab that you
must push down to disconnect. Carefully
remove each connector then set the radio
aside. (Fig. 3-4)
4. Quick-Sync Harness Installation
a. Remove Driver and Passenger Side Threshold
Panel
1. Disengage both ends of the threshold panel by
spreading the edges. Very carefully pull straight
up to remove. Repeat for other side. (Fig. 4-1)
.
b. Remove Kick Panel (Driver Side Only)
1. Use a plastic panel tool to remove the snap.
(Fig. 4-2)